Measuring instruments for professionals and DIY


		T660 humidity indicator T660 is a moisture indicator for measuring moisture in eg anhydrite and concrete or for detecting moisture in motorhomes or caravans. It measures up to 4 cm into the material. This provides a fast and reliable detection of moisture in wall or floor surfaces. Handy and time-saving: Before measuring, you can define an individual limit value in T660 settings, If this value is exceeded during a measurement an alarm signal sounds. The T660 has a large and clear display which can be read even in bright sunshine. Data can be transferred via USB output to a PC for further processing.
		BT20 Stick thermometer It is hygienic and easy to clean and is equipped with a soft-touch rubber handle. Fast temperature control - the reaction time is only 2 seconds and a large measuring range from -40 to +250 makes this practical plug thermometer an invaluable tool in industries such as: catering, laboratories, trade and industry and is a must for the amateur enthusiast. BT20 is the ideal instrument for both food producers, service experts and food inspectors. The thermometer enables you to quickly and efficiently determine the core temperatures of foods in accordance with HACCP regulations. BT20 is a measuring instrument suitable for both professional and amateur chefs.
		BC15 Thermohygrometer An easy, solid and mobile 2-in-1 climate meter BC15 provides exact data on the ambient air temperature and relative humidity. The data is clearly displayed within a few seconds on the illuminated display. The thermohygrometer can be used for climate measurement in e.g. residential areas, offices, production buildings, horticulture, storage rooms, laboratories, flower shops or agricultural production. BC15 is equipped with a minimum and maximum value function for later assessment, as well as a save function that makes it possible to save a measured value taken at a given time. BC15 can be used in extreme conditions. The rigid and shockproof, stainless steel sensor head is protected by a split hood designed to protect the sensor system - one of the many thoughtful details about the tool's usability, which emphasizes the quality requirements we set for a thermohygrometer of this kind.
		BA15 Anemometer The practical way to measure an air flow Problems measuring air velocity, air volume and air temperature are a thing of the past thanks to the BA15 anemometer. The mobile instrument is quick to use and clearly displays the measured values on the illuminated screen. In addition to the common values, the instrument can also display minimum and maximum values and values measured at a given time. BA15 is equipped with a flexible, 40 cm gooseneck which makes it easy to measure in places that are normally inaccessible or places or discharge channels, discharge grids, channels or vortex tubes. It is ideal for heat measurement, calibration and volume calculation of air masses. In addition, BA15 is also very suitable for hobby enthusiasts who want to determine the wind speed or see if the electrical machines in the house such as air conditioning or cooling fans in eg bidbudstyr provide what they need.
		BG20 Carbon monoxide meter BG20 can show the content of carbon monoxide in the air and ensure that dangerous concentrations are detected in a quick and easy way. The handheld BT20 is ready as early as 2 seconds after it is switched on and can instantly measure carbon monoxide concentrations from 0 to 1000 ppm. The carbon monoxide is measured with an accuracy of +/- 10 ppm and is immediately shown on the display. The BG20 can store up to 10 measurements for later use. The built-in automatic alarm alerts with a howl if the measured value exceeds 35 ppm. The intervals become shorter as the concentration increases and the alarm becomes a continuous beep at 200 ppm. The alarm values can be adjusted.
		BS06 Noise meter BS06 can quickly measure sound level and display values between 40 and 130 db. It is also equipped with a minimum / maximum function. BS06 is delivered with a wind hood which ensures reliable results outdoors. BS06 is equipped with a sensor that automatically turns on the backlight of the display when needed. The areas of use are numerous, from noise measurements in offices, workshops, construction sites to measuring traffic noise, locating noise in eg ventilation systems or in discos.
		BR15 Microwave meter The BR15 can measure radiation in the 2.45 GHz ISM band. Radiation from microwave ovens, WLAN Routers, cordless DECT phones, bluetooth equipment and mobile transmitters - BR15 can detect harmful radiation from it all. The results are shown in the digital display, and measurements that exceed the ICNIRP maximum value of 5 mW / cm2 are notified both in the display and with an acoustic signal. Worth knowing about EMF radiation Most countries in the world follow the recommendation of the International Commission on Non-ionizing Radiation Protection (ICNIRP) regarding maximum values for radiation in the high frequency band. The current limit values recommended by ICNIRP vary between 0.2 to 5 mW / cm2 - depending on the application. All values above this are considered harmful by all countries.
		BM15 Moisture meter BM15 is very simple and quick to use to determine the moisture content of wood and building materials - remove the protective cap and insert the electrodes into the material to be examined and read the value. Areas of application include everything from measuring moisture in firewood or timber to putty, plaster and stucco products. There is a reference adapter built into the protective cap, which can be used for battery checks and to perform various function checks. The calibration curve for moisture in wood is based on an average of all woods in Europe at 20 OC, and this means that it is not necessary to adjust any settings to make a quick determination of the moisture content of different woods.
		BM21 Moisture meter BM21 is very simple and quick to use to determine the moisture content of wood and building materials - remove the protective cap and insert the electrodes into the material to be examined and read the value. A bar scale and a digital display in percent facilitate reading, as well as two individual scales, one for wood and one for building materials, it also makes the accuracy even better. Interchangeable dipsticks ensure optimal contact at all times. Areas of application include everything from measuring moisture in firewood or timber to putty, plaster and stucco products. There is a reference adapter built into the protective cap, which can be used for battery checks and to perform various function checks. The calibration curve for moisture in wood is based on an average of all woods in Europe at 20 OC, and this means that it is not necessary to adjust any settings to make a quick determination of the moisture content of different woods.
		BO25 Video Endoscope BO25 allows you to perform visual inspections in places that are otherwise largely inaccessible or extremely difficult to reach, and allows you to document and save the inspection results, not only as an image but also as a video that you can watch on an external monitor or transfer to your PC for further processing. BO25 is equipped with a 180 ° image inverter, side mirror, quad LEDs and adjustable lighting and is therefore able to give you images and video sequences of very good quality from the most inaccessible places. B025 very useful, yet very simple to use. Thanks to a menu on the screen combined with a selection of intelligent preset values such as lighting and focus, it makes the BO25 logical to use. Practical details: Lightweight, compact, easy to use with a semi-flexible gooseneck probe - Memory function for the individual images and video sequences - Robust video probe with fixed Focus lens and waterproof camera head (IP67) - 3.2 "color LCD screen - Powerful quad LED with adjustable brightness - Intuitive menu navigation thanks to multi-language on-screen menu - 180 ° image inverter function - Auto sluk - Adapter with side mirror, hook and magnet is included. Interchangeable probes are available as additional accessories Technical data Probe Ø 17 mm / length 1,000 mm Focus range 50 - 150 mm Type of lighting quad-LED Display (resolution) 3-inch LCD (320 x 240 pixels) Frame rate 30 fps. (frames per second) Features: Video recording and photo images, photo memory with time and date, brightness control, multi-language On-screen menu, 180 ° image inverter, automatic shut-off Photo / video resolution 320 x 240 pixels / 320 x 240 pixels File format photo / video JPEG / MPEG4, AVI, 3GP Video standard NTSC / PAL USB interface (mini 5-pin type), Video-Out (composite video) Internal memory: 128 MB Flash. External: SD memory card slot Power 3.7 V Li-Io battery, rechargeable Weight 580 g