monolithic gluing of cracks and crevices due to overload, unintended effects, shrinkage, etc.
gluing and reinforcement by injection into cracks and crevices
sealing / sealing of cracks and fissures.
Mapepoxy BI is a two-component solvent-free epoxy. Component A (base) and component B (hardener) must be mixed before the product can be used.
Mapepoxy BI has a special formulation, which contributes to high capillary activity, and adheres perfectly to concrete and steel.
Mapepoxy BI does not contain benzyl alcohol or other plasticizers that can migrate from the product after curing under normal conditions. The product will remain unchanged throughout the life of the construction.
Mapepoxy BI has a very high mechanical strength and also adheres well to concrete in humid conditions.
Mapepoxy BI polymerizes without shrinkage and is waterproof after curing.
Mapepoxy BI has been assessed by the health authorities for use in contact with drinking water.
Mapepoxy BI complies with the principles described in EN 1504-9 standard “Products and systems for repairing concrete structures. Definitions, requirements, quality control and evaluation of compliance. General rules for use of products and systems ”and the requirements described in EN 1504-5“ Concrete injection ”.
Mapecoat I is used as an epoxy paint for floors and walls.
Mapecoat I is suitable for floors in warehouses, industry, basements, sewage treatment plants, agricultural buildings, etc.
Mapecoat I is usually applied to concrete and other cementitious substrates.
Mapecoat I is a durable epoxy paint for concrete floors, walls, ceilings, etc.
Mapecoat I provides a chemical-resistant, hard and even surface that is easy to clean.
Mapecoat I is delivered colored according to the current color card.
Mapecoat I complies with the principles described in NS-EN 1504-9 “Products and systems for repairing concrete structures: Definitions, requirements, quality control and evaluation. General rules for the use of products and systems ”, as well as the requirements, described in NS-EN 1504-2 “Surface treatment systems” for the class: Surface protection products – coating (C) – PI, MC, PR and IR. Mapecoat I complies with NS-EN 13813.
Two-component epoxy primer, intended for substrates such as concrete with moisture in the surface
FIELD OF APPLICATION
Mapeprimer M can be used as a primer for both epoxy and polyurethane coatings in connection with floors and wall surfaces, for use on balconies and warehouses, in industry and the food industry etc.
Mapeprimer M is usually applied to concrete and other cement-based substrates.
Mapeprimer M can be used where the concrete surface is dry or damp, and provides excellent adhesion for subsequent coatings or top coats.
Mapeprimer M is a low-emission product that meets the requirements of the M1 classification.
Mapeprimer M has been tested for use on wet concrete according to EN 13578 – Compatibility on wet concrete.
Mapeprimer M complies with the principles described in EN 1504-9 (“Products and systems for repairing concrete structures: Definitions, requirements, quality control and evaluation ”. General rules for the use of products and systems ”), as well as the requirements, described in EN 1504-2 (“ Surface treatment systems ”) for the principles: Products for protection of surfaces – Coating (C) – PI, PR and CR.
Mapecoat Universal is used as a transparent epoxy binder in connection with:
Mapecoat Universal is also used for fiberglass lamination, mixed with graded quartz sand for epoxy mortar or mixed with Sylotix 53 for epoxy putty.
Mapecoat Universal is usually used on concrete and other cement-based substrates.
Mapecoat Universal is a durable epoxy for use on floors, walls, roofs etc.
Mapecoat Universal has good chemical resistance, and provides a hard and smooth surface that is easy to keep clean.
Mapecoat Universal has minimal yellowing compared to other epoxy binders.
Mapecoat Universal is in accordance with the principles described in EN 1504-9 “Products and systems for repairing concrete structures; Definitions, requirements, quality control and conformity assessment. General rules for use of products and systems ”, and the requirements described in en 1504-2 “Surface treatment systems” for the principles: Surface protection products – Coating (C) – PI, IR, PR and MC.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.